Home / Applications

LED Lighting Solutions by Application

The right fixture depends on mounting height, air quality, maintenance access and the task below. These are the four environments we specify most often.

Distribution warehouse with high bay lighting above racking

01 · Warehouses & logistics

Light the pallet face, not just the floor.

In high-rack warehouses, the useful light is the vertical illumination on racking faces. A narrow optic at the right mounting height often does more than a higher-wattage wide beam.

  • High bay 60°/90° for racking aisles at 8–12 m.
  • Linear high bay for lower aisles and picking zones.
  • Optional occupancy sensors for intermittent aisles.
Manufacturing floor with overhead industrial lighting

02 · Manufacturing

Stable light for inspection and assembly.

Production areas need consistent colour and low glare, especially where operators inspect surfaces or read labels. Dust and metal particles also demand a sealed optical chamber.

  • High bay 90°/120° for general production halls.
  • CRI ≥90 options for colour-critical inspection.
  • IP65 sealed fixtures for dusty or washdown areas.
Outdoor construction and infrastructure lighting at dusk

03 · Outdoor & infrastructure

Weather, surge and glare all matter.

Outdoor projects fail on water ingress and voltage spikes more often than on lumen output. Specify IP66, a 10kV surge module and a bracket that can be locked against wind movement.

  • Flood lights for yards, facades and construction sites.
  • Street lights with Type II/III optics for roads and car parks.
  • Photocell and dimming options for energy control.
Explosion-proof LED fixture for hazardous process areas

04 · Hazardous areas

When access is expensive, reliability is the specification.

Chemical, fuel and dust environments require sealed, corrosion-resistant fixtures and documented installation data. Maintenance access is usually the largest lifetime cost.

  • Explosion-proof fixtures for Zone 1/2 process areas.
  • Stainless fasteners and corrosion-resistant coating.
  • Spare drivers and gaskets supplied with the order.

Specification checklist

Five things to send with an inquiry.

The more of these you can share, the faster we can recommend a model and layout.

Dimensions

Building or area length, width and ceiling height; racking height if applicable.

Mounting height

Distance from floor to fixture, and whether the mounting is hook, bracket, pole or chain.

Target illuminance

Required lux on the task, or the lighting class for road and car-park projects.

Environment

Dust, moisture, washdown, ambient temperature, corrosive gases or hazardous zone.

Electrical supply

Voltage, frequency, dimming protocol and whether emergency operation is required.

Project schedule

Required delivery date, order quantity and any packaging or labelling requirements.

Let us review your layout.

Send a drawing or a simple sketch with dimensions and mounting heights. We will suggest fixtures, spacing and wattage.

Lumindus Lighting is a fictional brand. This website is a demo built for SEO and indexing practice.

Scroll to Top