
Overview
Road lighting with controlled glare.
The SL series uses a pressure die-cast body and a tool-free opening for driver access. The optical chamber is sealed to IP66, and the lens is recessed to reduce spill light and glare for drivers and residents.
Type II optics suit wide carriageways and car parks; Type III optics push light further along the road. A 10kV surge module is fitted as standard for areas with overhead lines or frequent switching.
- 30W, 60W, 100W, 150W and 200W models.
- 130–150 lm/W typical efficacy.
- IP66 with recessed tempered-glass lens.
- Photocell and 0–10V dimming optional.
Key features
Built for the roadside.
Type II / III optics
Forward-throw distributions for carriageways, parking aisles and industrial access roads.
10kV surge
Integrated surge protection reduces driver failures on exposed poles and overhead-line areas.
Tool-free access
Driver compartment opens without special tools, so maintenance does not require a full fixture swap.
Photocell ready
Optional NEMA or twist-lock photocell for dusk-to-dawn operation without extra wiring.
Pole compatibility
Standard 60 mm entry; adapters for 48–76 mm poles and wall brackets are available.
Corrosion protection
Polyester powder coating and stainless fasteners for coastal and industrial atmospheres.
Specifications
Standard models.
| Model | Power | Lumen output | Efficacy | CCT | Optics | IP | Control |
|---|---|---|---|---|---|---|---|
| SL-30 | 30W | 3,900 lm | 130 lm/W | 3000–6500K | Type II | IP66 | Optional photocell |
| SL-60 | 60W | 8,100 lm | 135 lm/W | 3000–6500K | Type II / III | IP66 | Optional photocell |
| SL-100 | 100W | 14,000 lm | 140 lm/W | 3000–6500K | Type II / III | IP66 | 0–10V + photocell |
| SL-150 | 150W | 21,750 lm | 145 lm/W | 3000–6500K | Type II / III | IP66 | 0–10V + photocell |
| SL-200 | 200W | 30,000 lm | 150 lm/W | 3000–6500K | Type II / III | IP66 | 0–10V + photocell |
CRI ≥70 standard for roadway versions; CRI ≥80 optional. Values are illustrative for this demo.
Applications
Where the SL series fits.
- Municipal roads, access roads and industrial estates.
- Car parks and logistics yards.
- Campus and facility perimeter lighting.
- Retrofit projects replacing HPS or mercury lamps.
For retrofit projects, we can match the existing pole spacing and mounting height, then adjust wattage and optics to meet the target road class.

OEM options
Matched to your road standard.
Optics
Type II, Type III and asymmetric distributions; custom light distributions for specific road widths.
Control
Photocell, 0–10V/DALI dimming, midnight dimming profile and surge protection levels.
Mechanical
Pole entry 48–76 mm, wall bracket, adjustable arm and custom RAL colour.
Branding
Logo, nameplate and project-specific carton marking for municipal tenders.
FAQ
Street light questions.
Type II or Type III — which one do I need?
Type II spreads light wider and suits car parks and wide roads; Type III throws light further along the carriageway. We can check the road width and pole spacing before recommending.
Can I keep the existing poles?
In most cases yes. We confirm the pole entry diameter, arm length and mounting height, then supply an adapter if needed.
Is a photocell included?
It is optional. Specify NEMA or twist-lock type on the PO; the fixture is pre-wired for either.
Retrofitting a road or car park?
Send the pole plan, mounting height and target lighting class. We will propose a wattage and optic combination.
Lumindus Lighting is a fictional brand. This website is a demo built for SEO and indexing practice.