Home / Products / Explosion-Proof LED Light

Explosion-Proof LED Light

50W–200W heavy-duty fixtures for chemical plants, fuel-handling areas and other hazardous zones. Sealed, corrosion-resistant and designed for difficult access.

Explosion-proof LED light with flame-proof housing and cable gland

Overview

Heavy housing. Controlled surface temperature.

The EP series uses a thick-walled die-cast housing, tempered glass and a sealed cable gland. The driver is isolated from the LED chamber, and the external fins keep surface temperature within the limits required for hazardous-area equipment.

Fasteners are stainless steel, and the gasket is a moulded silicone profile rather than a glued foam strip, so the seal can be re-used after maintenance. The mounting bracket can be rotated for wall, ceiling or frame installation.

  • 50W, 100W, 150W and 200W models.
  • IP66 sealed housing with tempered glass.
  • Flame-proof design principles for Zone 1/2 applications.
  • Stainless fasteners and corrosion-resistant finish.

Key features

Built for areas where access is expensive.

Sealed construction

Moulded silicone gasket, tempered glass and sealed cable entry protect the optical chamber from dust, moisture and washdown.

Thermal control

Thick housing and external fins keep LED and driver temperatures within the design window at high ambient temperatures.

Corrosion resistance

Polyester powder coating and stainless-steel fasteners for chemical, coastal and outdoor installations.

Serviceable design

Driver compartment and cable gland are accessible without disturbing the sealed optical path.

Mounting options

Adjustable bracket for wall, ceiling or frame mounting; eye-bolt and pole adapters available.

Project documentation

Datasheet, installation drawing and test report supplied with each batch.

Specifications

Standard models.

ModelPowerLumen outputEfficacyCCTBeamIPMounting
EP-5050W5,500 lm110 lm/W4000–6500K120°IP66Bracket
EP-100100W11,500 lm115 lm/W4000–6500K120°IP66Bracket
EP-150150W18,000 lm120 lm/W4000–6500K120°IP66Bracket / eye-bolt
EP-200200W26,000 lm130 lm/W4000–6500K120°IP66Bracket / eye-bolt

Hazardous-area certification scope is confirmed against the project’s zone classification and local requirements. Values are illustrative for this demo; no certificate numbers are claimed.

Applications

Where the EP series fits.

  • Chemical and petrochemical process areas.
  • Fuel loading platforms and storage tank farms.
  • Paint booths, solvent stores and dust-handling zones.
  • Wastewater and biogas facilities.

Send the zone classification, gas group and temperature class for the area. We will confirm the suitable housing, cable entry and installation accessories before quoting.

Chemical and process industry facility at dusk

OEM options

Matched to your hazardous-area schedule.

Electrical

Input voltage, cable gland size, terminal block and 0–10V dimming options.

Mechanical

Bracket type, eye-bolt, pole adapter, housing colour and stainless fasteners.

Optics

120° standard; narrower optics for walkways and equipment inspection points.

Documentation

Datasheet, installation drawing, test report and nameplate text per project.

FAQ

Hazardous-area questions.

Is the fixture certified for my zone?

Certification scope depends on the zone classification, gas group and temperature class. Send the area data sheet and we will confirm the applicable configuration before the order.

Can it be installed in a washdown area?

The IP66 housing suits washdown, but the bracket and fasteners should be specified in stainless steel for chemical or coastal exposure.

How is maintenance handled?

The driver compartment and cable gland are accessible without opening the optical chamber. Spare gaskets and drivers can be supplied with the order.

Specifying lighting for a hazardous area?

Send the zone classification, area dimensions and mounting conditions. We will confirm the suitable model and accessories.

Lumindus Lighting is a fictional brand. This website is a demo built for SEO and indexing practice.

Scroll to Top